UUS!
Liitu kohe!
Open MenuTootekataloogOpen CartOpen Search
search
Seaded
Veebisait (riik)
Tarneriik
keel
0
Sinu ostukorv on tühiLisa mõni toode või
suundu pealehele
TASUTA TRANSPORT
kui tellimus ületab 49€ (kuni 30 kg)
Logi sisse
Tule kliendiks
searchOtsi
-38%
Tööriistade kmpl 11xCT moodulites 166 osa R21010002, Gedore RED

Tööriistade kmpl 11xCT moodulites 166 osa R21010002, Gedore RED

3301657&GEDRED , O   GTIN: 4060833016575
Socket wrench tools:
Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
Square drive Conforms to DIN 3120, ISO 1174, with ball retention groove
Chrome-vanadium-steel, matt satin chrome-plated
2C reversible ratchet 1/4": To DIN 3120 – A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
Square plug-in handle 1/4":
1-component handle with in-hex
Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725
Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin
Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin
Socket extension 1/4":
Sliding T-handle with slide 1/4": Conforms to DIN 3122, ISO 3315
Universal joint 1/4": Joint bolted on, design to DIN 3123 – C 6.3
2C reversible ratchet 1/2": To DIN 3120 – A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
Socket extension 1/2":
Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315
Universal joint 1/2": Joint bolted on, design to DIN 3123 – C 12.5
Socket, hex: Metric, short, to DIN 3124, ISO 2725
Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated
Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
Chrome-vanadium steel
Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated
Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983
To DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983
To DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984
To DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984
Dipped handle protectors
Chrome-vanadium steel
Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
2C screwdriver: Slot and cross-slotted PZ, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back
Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel
Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
(De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools
Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel
Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 – C 6.3, machine operated, phosphated, plastic box
Loe kogu tootekirjeldust →
690.00 €1104.00 €
või 23.76 € / kuus
Kliendihind? Logi sisse!
Ostuga teenid23 mutrit
tk
Kohe saadaval: 1 tk , vaata saadavust →
lisa korvi
← Tagasi
Stokker Finance
max 30000 €
%
ehk 0.00 €
LIGIKAUDNE KUUMAKSE00.00 €Sisaldab intressi
Saadame Sind järgmisele lehele andmeid täitma.
1Vali lähim keskus
2Isikuandmed
€ / kuus
€ / kuus
Saadame andmed Stokkerile ülevaatamiseks
  • Tootekirjeldus
  • Saadavus
  • Socket wrench tools:
    Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
    Square drive Conforms to DIN 3120, ISO 1174, with ball retention groove
    Chrome-vanadium-steel, matt satin chrome-plated
    2C reversible ratchet 1/4": To DIN 3120 – A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
    Square plug-in handle 1/4":
    1-component handle with in-hex
    Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725
    Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin
    Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin
    Socket extension 1/4":
    Sliding T-handle with slide 1/4": Conforms to DIN 3122, ISO 3315
    Universal joint 1/4": Joint bolted on, design to DIN 3123 – C 6.3
    2C reversible ratchet 1/2": To DIN 3120 – A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
    Socket extension 1/2":
    Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315
    Universal joint 1/2": Joint bolted on, design to DIN 3123 – C 12.5
    Socket, hex: Metric, short, to DIN 3124, ISO 2725
    Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
    Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated
    Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
    Chrome-vanadium steel
    Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated
    Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
    Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
    Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
    Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
    Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983
    To DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983
    To DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984
    To DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984
    Dipped handle protectors
    Chrome-vanadium steel
    Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
    Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
    Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
    Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
    Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
    Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
    2C screwdriver: Slot and cross-slotted PZ, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
    2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
    Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back
    Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel
    Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
    Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
    Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
    (De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools
    Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel
    Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 – C 6.3, machine operated, phosphated, plastic box Pildid on illustreeriva tähendusega.
    + kuva rohkem
  • Keskladu Eesti1 tk
  • Saatmisviis
 

Sarnased tooted

 
Stokker on Baltikumi juhtiv professionaalsete tööriistade ja masinate müügi- ja teenindusettevõte
 
  • Klienditugi E-R 8.00-20.00 | L 09.00-13.00
 
 
 
 
Liitu uudiskirjaga ja saa parimatest pakkumistest teada enne teisi. Iga kuu värsked uudised, näpunäited ja pakkumised Sinu postkasti.
 
 
Kas teadsid, et 100st kliendist 92 soovitaks Stokkerit ka oma sõbrale või kolleegile.
Ära vajuta
Logi sisse
E-post
Mobiil-ID
ID-kaart
SmartID
Facebook/Google
Ei tea oma salasõna?
ID-kaart

Kui oled juba klient, logime su sisse. Kui mitte, registreerime su kliendiks. Lihtne!

Sisene Mobiil-IDga

Logi sisse SmartId-ga
  • Kui oled Stokkeri klient, siis esmakordsel kasutamisel
  • telli salasõna või logi sisse ID-ga.

Ei ole veel klient? Loe lisa või registreeru →Hakka kliendiks .