Greasen GREASEN COMPLEX 2 400g

GENERAL FEATURES: Greasen Complex 2 grease is manufactured basing on highly refined mineral base oil with the kinematic viscosity of 85 cSt at 40 o C and complex lithium thickener. It also includes additives improving antiwear, lubricating, anticorrosive and antioxidative properties. It is featured by high dropping point, very good pumping ability, high resistance to hot water, good lubricating properties, low temperature stability, compatibility with copper elements as well as good stability during long storage. PHYSICAL AND CHEMICAL PROPERTIES: NLGI class 2 Worked penetration at 250C mm/10 285 Dropping point 0C 260 Oil separation from grease, 100°C/30h %(m/m) 1.3 Lubricating properties: weld load daN 250 Corrosiveness to copper, 100°C/3h corrosion grade 1 Note: The above values of physical and chemical properties are typical values. Actual values are specified in quality certificates enclosed with each product lot.

Multipurpose, high temperature resistant Greasen Complex 2 grease is intended to lubricate highly loaded rolling and sliding bearings and other mechanisms, including using of central lubrication systems, working in the temperature range between ­40 o C to 160 o C, periodically up to 200 o C. Greasen Complex 2 is especially recommended to lubricate bearings of car wheel hubs, electric engines, hot fans, and also guides, articulated joints and other automotive and industry mechanisms. Due to its high durability it can be used for long term and manned free lubricating of machines and devices of various types with no need of additional lubricating during normal operation. STANDARDS, APPROVALS. SPECIFICATION: DIN 51502: KP2P­40 ISO 6743­9: DEHB­2 ASTM D4950: GC NLGI: 2